door alarm pin access
Standalone Digital Access Control
Pin Access keypad
A digital access control keypad designed for door strike and other access control applications in office.
  • Operation Voltage: 12-16VDC
  • Single User Mode - 2 users maximun ( 4-digits code )
  • Operation Mode: Pin Only
door alarm card access
Standalone Proximity Keypad
A RFID access control keypad designed for door strike and other access control applications in office.
  • Operation Voltage: 12-16VDC
  • Multi User Mode - 100 users maximun
  • Operation Mode: Pin Only, Card Only, Card+Pin.
   
entrypass access system
Standalone RFID Access Control Reader
  • RFID access control reader, read range up to 5cm
  • Reader is potted for water and dust proofing,
  • makes it a popular choice for both indoor and outdoor installation
  • Memory capacity store up to 670 user cards
  • Access mode: RFID Card, Pin, RFID Card or Pin, RFID Card & Pin
  • Door Open Time: 0-99seconds
  • Relay board separated from Reader; higher safety
entrypass mini card access
ENTRYPASS MiNi
A RFID access control keypad designed for door strike and other access control applications in office.
  • Operation Voltage: 12-16VDC
  • Single User Mode - 2 users maximun ( 4-digits code )
  • with LCD Display
  • Operation Mode: RFID card, pin, card+pin, card/pin
  • Works on standalone mode or PC online.
  • can be program as Wiegand output reader for 3rd party control panel connection
entrypass access control system, network based
EntryPass S2100 Controller : Two Door Control Panel
for Multi Doors solutions  EntryPass Door Access brochures

Main Features
  • System Memory: 128KB flash memory, 128KB SRAM
  • Support 2 Door Reader (1 or 2 doors)
  • Support all card format ( Wiegand 26,32,34,35,37, HID ICLASS, ABA Track II, Mi-Fare, o o and etc )
  • Support Integrated / Matrix keypad reader
  • 2 Configurable Communication Ports
  • 2 RS485 Port / 2 RS232 Port / 1 Ethernet Port ( optional )
  • Baud rate 9.6Kbps for serial / 10Mbps for Ethernet ( optional )
  • LED indicator for all data transmission
  • all COM ports are protected by surge arrestor
  • Real Time Clock with 3.6V / 60mAh backup battery
  • Hardware supervised by external watchdog
  • Hardware protect by resetable fuse
  • Hardware reset and database initialize tact switch
  • Support 20x2 dot matrix LCD
  • Adjustable on board buzzer
  • Firmware
         > 1500 card user and 3000 event storage
         > maximum 255 time zone
         > maximum 255 time set
         > maximum 255 access level
        > maximum 60 holidays setting
         > maximum 99 sec door open time
         > maximum 99 sec door release time
         > maximum 99 sec disarm delay time
         > maximum 99 sec arm delay time
         > maximum 99 min siren ON and OFF time
        > 3 set of facility code
        > 3 set of 6 digit door pin numbers
         > Auto lock release control by time zone
         > Antipassback by time zone
         > Exit button control by time zone
         > Support card expiration setting
         > Access mode ( pin only, card+pin, card only )
         > Support access mode by time zone
         > Support controller programming mode
         > Support data download and upload between PC and controller
         > Come with 12VDC power supply unit


since
1999

 

our services:

Install
Service
Repair

CCTV|Alarm

contact us at:
HP: 019-3213230
Fax: 03-77828230
email: sales@ealarm.com.my

Crystal Alarms & Automation
Kuala Lumpur, Malaysia